0
0
Fork 0
mirror of https://github.com/GreemDev/Ryujinx.git synced 2024-12-23 19:45:47 +00:00
Commit graph

11 commits

Author SHA1 Message Date
riperiperi
10aa11ce13
Interrupt GPU command processing when a frame's fence is reached. (#1741)
* Interrupt GPU command processing when a frame's fence is reached.

* Accumulate times rather than %s

* Accurate timer for vsync

Spin wait for the last .667ms of a frame. Avoids issues caused by signalling 16ms vsync. (periodic stutters in smo)

* Use event wait for better timing.

* Fix lazy wait

Windows doesn't seem to want to do 1ms consistently, so force a spin if we're less than 2ms.

* A bit more efficiency on frame waits.

Should now wait the remainder 0.6667 instead of 1.6667 sometimes (odd waits above 1ms are reliable, unlike 1ms waits)

* Better swap interval 0 solution

737 fps without breaking a sweat. Downside: Vsync can no longer be disabled on games that use the event heavily (link's awakening - which is ok since it breaks anyways)

* Fix comment.

* Address Comments.
2020-12-17 19:39:52 +01:00
riperiperi
aec8177850
Replace Host FPS with GPU command queue load ("Fifo %") (#1585)
* Replace Host FPS with FIFO%

* Change measurement order. Improve calculation.

Now at 100% when FIFO is blocking game exectution, rather than "0".

* Address feedback (1)

* Remove Host FPS

* FIFO rather than Fifo

* Address Ac_k feedback

* Rebase
2020-10-14 07:54:42 +11:00
Mary
4f3ae6f62c
Remove the Ryujinx.Debugger project (#1506)
This project wasn't really used by anyone and isn't worth mantaining.

This commit remove the profiler entirely from Ryujinx and remove the associated CI tasks.
2020-08-30 19:06:05 +02:00
emmauss
f2b9a9c2b0
Render Profiler in GUI (#854)
* move profiler output to gui

* addressed commits, rebased

* removed whitespaces
2020-02-06 11:25:47 +00:00
BaronKiko
a07086c280 Built in profiling (#567)
* Profiler initial setup

* Capture actual timing data

* Profiling data dumped to file on close

* Support for multiple sessions under the same name

* Service profiling

* Sort output for easier read

* csv output

* Split session into 2 seperate values

* Refactor name to category

* Basic profiling window dummy. Toggle with F1 or set key with config
No actual data displayed yet, just a pretty triangle

* Simple font rendering

* Display some actual timing data

* Fix font bearing being ignored

* x bearing and advance. Fixed y bearing calc

* Different coloured lines to make reading easier

* Scrolling

* Multiple columns for name

* Column titles

* display in ms rather than ticks

* Bars to display times

* Sortable columns

* Regex filtering

* Better instant timing calculation
Fixed minor regex bug

* Better filtering
Better max value calculation
Skip some rendering to reduce profiler weight

* Variable update rate

* Show/hide inactive button
Some other touchups

* Add missing project reference

* Hide inactive and pause

* Fix viewport errors

* Update initial window position

* Variable name cleanup

* Disable timing dump by default

* Internal Profile refactor and cleanup

* Timing info cleanup

* Profile config cleanup

* Settings cleanup

* Button refactor

* Profile refactor

* Profile window cleanup

* Window manager refactor

* Font service cleanup

* Fixed bug in profiling method where method was called twice without profiling enabled

* Allow update rates of less than 1hz

* Stop using window.run because it's apparently not great for performance.
Some other performance things, should only draw a new frame when something has changed

* Improved time tracking to keep history

* Profile window was getting too long so I added regions and split bar rendering out into partial class

* Dummy graph view with button to toggle

* Realtime graphing initial commit

* Display totals on new bar

* Simple zooming support with arrow keys

* Limit graph zoom and label start and stop

* Added support for timing flags

* Stop data running away when paused and frame updated

* Manual step button

* Update at when flag issued (ie every frame)

* Removed useless finish profiling call

* Enable and disable profiling at compile time.

* Better plage for frame swap flag, also kept enough flags to cover larger time spans

* No more stopwatches created, uses PerformanceCounter now

* public and internal fields to props

* Move visible update to update rather than draw as it causes a lockup if called from draw
Also added profile window disposal so closing main window closes profiler too

* Fixed optimization settings for profiled builds

* Appveyer script guess to add profiling builds

* Quotes

* 1 less quote

* Maybe escape space?

* Specify config

* Different approach

* Fix file paths

* Fix another path

* Better artifact naming

* Missing -

* test  string

* Removed for, to test

* readd for

* moved dashes around so artifacts can begin with letters

* quote env vars

* martix

* Removed configs

* Much more efficient capture, ConcurrentDictionary was causing too much overhead

* Skip repeating pixels during draw

* Stop ram usage getting too high. Compensating for cleanup doing more now

* Profile CPU, execute skipped because it's just too much work

* Fixed bug with skipping draws. Furthest needed to be reset every loop

* Less distracting colour for timing flags

* Removed profile method function. It just doesn't play nice with conditional compilation so best to remove it now before it's used a lot

* Null check for category, group and item

* Forgot to reset instant count/time

* Increment line when blank

* Fix threading conflict
Fixed instant count and time. Now accuratly represents the total time and count in the buffer

* Fixed bug in time rendering where times were being trimmed to an int.
Also added  microsecond/millisecond formatting to reduce the number of decimal places needed

* Support for multiple profiling levels

* Sometimes it would have to wait a long time for lock to clear so moved it to a tryenter and skip if already locked

* Dumb bug regarding clearing of timestamps. Start is already removed so no need to add it to the start

* Optimisations in drawing routine:
Only calculate bar top and bottom once per bar rather than once per timestamp
Pre-calculate the right side of the graph as it was being calculated multiple times per bar
Skip rendering timestamps that occupy the same pixel space now uses the raw timestamp to decide. While technically not as accurate it's much easier as the right side of the bar doesn't have to be calculated for a skipped timestamp

* Couple alignment changes

* Custom equals overload for profile config. The default implpmentation was just too slow

* Bump cleanup thread priority. It clears the timer queue so it need to be run frequently

* Fixed bug with scrolling caused by recent rendering optimisations. Simply forgot to increment the line index on a skipped line

* Stopped blocking memory disposal so much. Also parralised(?) cleanup call

* Uses Arial for font.

* Enable AA

* Inital seperated config support

* Fix profile input from keyboard

* Check toggle visible key from profiler

* Can't use conditional here as _profileWindow doesn't exist it non-profiling build

* Removed junk from merge in sln

* Fromatting cleanup for review

* Fiked small bug caused by race condition

* Added multiple flags with colours
Added way to set max flags

* Fixed flag times
Dispays time flags in window

* Colors for text frame times

* enable and disable flags button added
better fix for race crash

* Re factored npad out

* Explicitly specified type in foreach

* Removed extra line

* Added s to fix nit

* Comment to clarify default time

* Another s nit

* Ordering nit

* Uses Interlocked.Increment over lock

* Unindented #if's and #regions

* Comment to clarify these are indexes in the list

* Uses iequatable over override equals to avoid conversion and checks at runtime

* Removed no longer used variable
2019-04-26 14:53:10 +10:00
Alex Barney
fb1d9493a3 Adjust naming conventions and general refactoring in HLE Project (#527)
* Rename enum fields

* Naming conventions

* Remove unneeded ".this"

* Remove unneeded semicolons

* Remove unused Usings

* Don't use var

* Remove unneeded enum underlying types

* Explicitly label class visibility

* Remove unneeded @ prefixes

* Remove unneeded commas

* Remove unneeded if expressions

* Method doesn't use unsafe code

* Remove unneeded casts

* Initialized objects don't need an empty constructor

* Remove settings from DotSettings

* Revert "Explicitly label class visibility"

This reverts commit ad5eb5787cc5b27a4631cd46ef5f551c4ae95e51.

* Small changes

* Revert external enum renaming

* Changes from feedback

* Apply previous refactorings to the merged code
2018-12-06 09:16:24 -02:00
gdkchan
3615a70cae
Revert "Adjust naming conventions and general refactoring in HLE Project (#490)" (#526)
This reverts commit 85dbb9559a.
2018-12-04 22:52:39 -02:00
Alex Barney
85dbb9559a Adjust naming conventions and general refactoring in HLE Project (#490)
* Rename enum fields

* Naming conventions

* Remove unneeded ".this"

* Remove unneeded semicolons

* Remove unused Usings

* Don't use var

* Remove unneeded enum underlying types

* Explicitly label class visibility

* Remove unneeded @ prefixes

* Remove unneeded commas

* Remove unneeded if expressions

* Method doesn't use unsafe code

* Remove unneeded casts

* Initialized objects don't need an empty constructor

* Remove settings from DotSettings

* Revert "Explicitly label class visibility"

This reverts commit ad5eb5787cc5b27a4631cd46ef5f551c4ae95e51.

* Small changes

* Revert external enum renaming

* Changes from feedback

* Remove unneeded property setters
2018-12-04 18:23:37 -02:00
gdkchan
c393cdf8e3
More flexible memory manager (#307)
* Keep track mapped buffers with fixed offsets

* Started rewriting the memory manager

* Initial support for MapPhysicalMemory and UnmapPhysicalMemory, other tweaks

* MapPhysicalMemory/UnmapPhysicalMemory support, other tweaks

* Rebased

* Optimize the map/unmap physical memory svcs

* Integrate shared font support

* Fix address space reserve alignment

* Some fixes related to gpu memory mapping

* Some cleanup

* Only try uploading const buffers that are really used

* Check if memory region is contiguous

* Rebased

* Add missing count increment on IsRegionModified

* Check for reads/writes outside of the address space, optimize translation with a tail call
2018-08-15 15:59:51 -03:00
gdkchan
e7559f128f
Small OpenGL Renderer refactoring (#177)
* Call OpenGL functions directly, remove the pfifo thread, some refactoring

* Fix PerformanceStatistics calculating the wrong host fps, remove wait event on PFIFO as this wasn't exactly was causing the freezes (may replace with an exception later)

* Organized the Gpu folder a bit more, renamed a few things, address PR feedback

* Make PerformanceStatistics thread safe

* Remove unused constant

* Use unlimited update rate for better pref
2018-06-23 21:39:25 -03:00
gdkchan
76f3b1b3a4 Rename Ryujinx.Core to Ryujinx.HLE and add a separate project for a future LLE implementation 2018-06-10 21:46:42 -03:00
Renamed from Ryujinx.Core/PerformanceStatistics.cs (Browse further)