* Replace CacheResourceWrite with more general "precise" write
The goal of CacheResourceWrite was to notify GPU resources when they were modified directly, by looking up the modified address/size in a structure and calling a method on each resource. The downside of this is that each resource cache has to be queried individually, they all have to implement their own way to do this, and it can only signal to resources using the same PhysicalMemory instance.
This PR adds the ability to signal a write as "precise" on the tracking, which signals a special handler (if present) which can be used to avoid unnecessary flush actions, or maybe even more. For buffers, precise writes specifically do not flush, and instead punch a hole in the modified range list to indicate that the data on GPU has been replaced.
The downside is that precise actions must ignore the page protection bits and always signal - as they need to notify the target resource to ignore the sequence number optimization.
I had to reintroduce the sequence number increment after I2M, as removing it was causing issues in rabbids kingdom battle. However - all resources modified by I2M are notified directly to lower their sequence number, so the problem is likely that another unrelated resource is not being properly updated. Thankfully, doing this does not affect performance in the games I tested.
This should fix regressions from #2624. Test any games that were broken by that. (RF4, rabbids kingdom battle)
I've also added a sequence number increment to ThreedClass.IncrementSyncpoint, as it seems to fix buffer corruption in OpenGL homebrew. (this was a regression from removing sequence number increment from constant buffer update - another unrelated resource thing)
* Add tests.
* Add XML docs for GpuRegionHandle
* Skip UpdateProtection if only precise actions were called
This allows precise actions to skip reprotection costs.
* Fast path for Inline2Memory buffer write
This PR adds a method to PhysicalMemory that attempts to write all cached resources directly, so that memory tracking can be avoided. The goal of this is both to avoid flushing buffer data, and to avoid raising the sequence number when data is written, which causes buffer and texture handles to be re-checked.
This currently only targets buffers, with a side check on textures that falls back to a tracked write if any exist within the target range. It's not expected to write textures from here - this is just a mechanism to protect us if someone does decide to do that. It's possible to add a fast path for this in future (and for ShaderCache, once that starts using tracking)
The forced read before inline2memory begins has been skipped, as the data is fully written when the transfer is completed anyways. This allows us to flush on read in emergency situations, but still write the new data over the flushed data.
Improves performance on Xenoblade 2 and DE, which was flushing buffer data on the GPU thread when trying to write compute data. May improve performance in other games that write SSBOs from compute, and update data in the same/nearby pages often.
Super Smash Bros Ultimate should probably be tested to make sure the vertex explosions haven't returned, as I think that's what this AdvanceSequence was for.
* ForceDirty before write, to make sure data does not flush over the new write
* Lift textures in the AutoDeleteCache for all modifications.
Before, this would only apply to render targets and texture blit. Now it applies to image stores, the fast dma copy path and any other type of modification.
Image store always at least has one reference in the texture pool, so the function of the AutoDeleteCache keeping textures _alive_ is not useful, but a very important function for a while has been its use to flush textures in order of modification when they are dereferenced, so that their data is not lost.
Before, textures populated using image stores were being dereferenced and reloaded as garbage. Now, when these textures are dereferenced, their data will be put back into memory, and everything stays intact.
Fixes lighting breaking when switching levels in THPS1+2, and potentially some more UE4 games. I've tested a bunch more games for regressions and performance impact, but they all seem fine.
* Lift copy srcTexture so that it doesn't remain referenceless
* Perform lift before reference count change on unbind.
It's important to lift on unbind as that is the moment the texture was truly last modified, but definitely not after releasing every single reference.
* Avoid deleting textures when their data does not overlap.
It's possible that while two textures start and end addresses indicate an overlap, that the actual data contained within them is sparse due to a layer stride. One such possibility is array slices of a cubemap at different mip levels - they overlap on a whole, but the actual texture data fills the gaps between each other's layers rather than actually overlapping.
This fixes issues with UE4 games having incorrect lighting (solid white screen or really dark shadows). There are still remaining issues with games that use the 3D texture prebaked lighting, such as THPS1+2.
This PR also fixes a bug with TexturePool's resized texture handling where the base level in the descriptor was not considered.
* AllRegions granularity for 3d textures is now by level rather than by slice.
* Address feedback
This greatly reduces memory usage in games that aggressively reuse memory without removing dead textures from the pool, such as the Xenoblade games, UE3 games, and to a lesser extent, UE4/unity games.
This change stops memory usage from ballooning in xenoblade and some other games. It will also reduce texture view/dependency complexity in some games - for example in MK8D it will reduce the number of surface copies between lighting cubemaps generated for actors.
There shouldn't be any performance impact from doing this, though the deletion and creation of textures could be improved by improving the OpenGL texture storage cache, which is very simple and limited right now. This will be improved in future.
Another potential error has been fixed with the texture cache, which could prevent data loss when data is interchangably written to textures from both the GPU and CPU. It was possible that the dirty flag for a texture would be consumed without the data being synchronized on next use, due to the old overlap check. This check no longer consumes the dirty flag.
Please test a bunch of games to make sure they still work, and there are no performance regressions.
* Use "Undesired" scale mode for certain textures rather than blacklisting
* Nit
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* 3D engine now uses DeviceState too, plus new state modification tracking
* Remove old methods code
* Remove GpuState and friends
* Optimize DeviceState, force inline some functions
* This change was not supposed to go in
* Proper channel initialization
* Optimize state read/write methods even more
* Fix debug build
* Do not dirty state if the write is redundant
* The YControl register should dirty either the viewport or front face state too, to update the host origin
* Avoid redundant vertex buffer updates
* Move state and get rid of the Ryujinx.Graphics.Gpu.State namespace
* Comments and nits
* Fix rebase
* PR feedback
* Move changed = false to improve codegen
* PR feedback
* Carry RyuJIT a bit more
* Use DeviceState for compute and i2m
* Migrate 2D class, more comments
* Migrate DMA copy engine
* Remove now unused code
* Replace GpuState by GpuAccessorState on GpuAcessor, since compute no longer has a GpuState
* More comments
* Add logging (disabled)
* Add back i2m on 3D engine
* Make GPU memory manager a member of GPU channel
* Move physical memory instance to the memory manager, and the caches to the physical memory
* PR feedback
* Ground work for separate GPU channels
* Rename TextureManager to TextureCache
* Decouple texture bindings management from the texture cache
* Rename BufferManager to BufferCache
* Decouple buffer bindings management from the buffer cache
* More comments and proper disposal
* PR feedback
* Force host state update on channel switch
* Typo
* PR feedback
* Missing using
