* Initial Implementation
About as fast as nvidia GL multithreading, can be improved with faster command queuing.
* Struct based command list
Speeds up a bit. Still a lot of time lost to resource copy.
* Do shader init while the render thread is active.
* Introduce circular span pool V1
Ideally should be able to use structs instead of references for storing these spans on commands. Will try that next.
* Refactor SpanRef some more
Use a struct to represent SpanRef, rather than a reference.
* Flush buffers on background thread
* Use a span for UpdateRenderScale.
Much faster than copying the array.
* Calculate command size using reflection
* WIP parallel shaders
* Some minor optimisation
* Only 2 max refs per command now.
The command with 3 refs is gone. 😌
* Don't cast on the GPU side
* Remove redundant casts, force sync on window present
* Fix Shader Cache
* Fix host shader save.
* Fixup to work with new renderer stuff
* Make command Run static, use array of delegates as lookup
Profile says this takes less time than the previous way.
* Bring up to date
* Add settings toggle. Fix Muiltithreading Off mode.
* Fix warning.
* Release tracking lock for flushes
* Fix Conditional Render fast path with threaded gal
* Make handle iteration safe when releasing the lock
This is mostly temporary.
* Attempt to set backend threading on driver
Only really works on nvidia before launching a game.
* Fix race condition with BufferModifiedRangeList, exceptions in tracking actions
* Update buffer set commands
* Some cleanup
* Only use stutter workaround when using opengl renderer non-threaded
* Add host-conditional reservation of counter events
There has always been the possibility that conditional rendering could use a query object just as it is disposed by the counter queue. This change makes it so that when the host decides to use host conditional rendering, the query object is reserved so that it cannot be deleted. Counter events can optionally start reserved, as the threaded implementation can reserve them before the backend creates them, and there would otherwise be a short amount of time where the counter queue could dispose the event before a call to reserve it could be made.
* Address Feedback
* Make counter flush tracked again.
Hopefully does not cause any issues this time.
* Wait for FlushTo on the main queue thread.
Currently assumes only one thread will want to FlushTo (in this case, the GPU thread)
* Add SDL2 headless integration
* Add HLE macro commands.
Co-authored-by: Mary <mary@mary.zone>
* Add support for HLE macros and accelerate MultiDrawElementsIndirectCount
* Add missing barrier
* Fix index buffer count
* Add support check for each macro hle before use
* Add missing xml doc
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Return mapped buffer pointer directly for flush, WriteableRegion for textures
A few changes here to generally improve performance, even for platforms not using the persistent buffer flush.
- Texture and buffer flush now return a ReadOnlySpan<byte>. It's guaranteed that this span is pinned in memory, but it will be overwritten on the next flush from that thread, so it is expected that the data is used before calling again.
- As a result, persistent mappings no longer copy to a new array - rather the persistent map is returned directly as a Span<>. A similar host array is used for the glGet flushes instead of allocating new arrays each time.
- Texture flushes now do their layout conversion into a WriteableRegion when the texture is not MultiRange, which allows the flush to happen directly into guest memory rather than into a temporary span, then copied over. This avoids another copy when doing layout conversion.
Overall, this saves 1 data copy for buffer flush, 1 copy for linear textures with matching source/target stride, and 2 copies for block textures or linear textures with mismatching strides.
* Fix tests
* Fix array pointer for Mesa/Intel path
* Address some feedback
* Update method for getting array pointer.
It seems like this method of flushing data is much slower on Mesa drivers, and slightly slower on Intel Windows. Have not tested Intel Mesa, but I'm assuming it is the same as AMD.
This also adds vendor detection for AMD on Unix, which counted as "Unknown" before.
* openal: Update to OpenTK 4
* Ryujinx.Graphics.OpenGL: Update to OpenTK 4
* Entirely removed OpenTK 3, still wip
* Use SPB for context creation and handling
Still need to test on GLX and readd input support
* Start implementing a new input system
So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal
Button mapping backend is implemented
TODO: front end, configuration handling and configuration migration
TODO: keyboard support
* Enforce RGB only framebuffer on the GLWidget
Fix possible transparent window
* Implement UI gamepad frontend
Also fix bad mapping of minus button and ensure gamepad config is updated in real time
* Handle controller being disconnected and reconnected again
* Revert "Enforce RGB only framebuffer on the GLWidget"
This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965.
* Fix first color clear
* Filter SDL2 events a bit
* Start working on the keyboard detail
- Rework configuration classes a bit to be more clean.
- Integrate fully the keyboard configuration to the front end (TODO: assigner)
- Start skeleton for the GTK3 keyboard driver
* Add KeyboardStateSnapshot and its integration
* Implement keyboard assigner and GTK3 key mapping
TODO: controller configuration mapping and IGamepad implementation for keyboard
* Add missing SR and SL definitions
* Fix copy pasta mistake on config for previous commit
* Implement IGamepad interface for GTK3 keyboard
* Fix some implementation still being commented in the controller ui for keyboard
* Port screen handle code
* Remove all configuration management code and move HidNew to Hid
* Rename InputConfigNew to InputConfig
* Add a version field to the input config
* Prepare serialization and deserialization of new input config and migrate profile loading and saving
* Support input configuration saving to config and bump config version to 23.
* Clean up in ConfigurationState
* Reference SPB via a nuget package
* Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2
* move GTK3 input to the right directory
* Fix triggers on SDL2
* Update to SDL2 2.0.14 via our own fork
* Update buttons definition for SDL2 2.0.14 and report gamepad features
* Implement motion support again with SDL2
TODO: cemu hooks integration
* Switch to latest of nightly SDL2
* SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index
* Ensure values are set in UI when the gamepad get hot plugged
* Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids
This fixes permanent rumble of pro controller in some hotplug scenario
* Fix more UI bugs
* Move legcay motion code around before reintegration
* gamecontroller UI tweaks here and there
* Hide Motion on non motion configurations
* Update the TODO grave
Some TODO were fixed long time ago or are quite oudated...
* Integrate cemu hooks motion configuration
* Integrate cemu hooks configuration options to the UI again
* cemuhooks => cemuhooks
* Add cemu hook support again
* Fix regression on normal motion and fix some very nasty bugs around
* Fix for XCB multithreads issue on Linux
* Enable motion by default
* Block inputs in the main view when in the controller configuration window
* Some fixes for the controller ui again
* Add joycon support and fixes other hints
* Bug fixes and clean up
- Invert default mapping if not a Nintendo controller
- Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment)
- Clean up hints in use
- Remove debug logs around
- Fixes potential double free with SDL2Gamepad
* Move the button assigner and motion logic to the Ryujinx.Input project
* Reimplement raw keyboard hle input
Also move out the logic of the hotkeys
* Move all remaining Input manager stuffs to the Ryujinx.Input project
* Increment configuration version yet again because of master changes
* Ensure input config isn't null when not present
* Fixes for VS not being nice
* Fix broken gamepad caching logic causing crashes on ui
* Ensure the background context is destroyed
* Update dependencies
* Readd retrocompat with old format of the config to avoid parsing and crashes on those versions
Also updated the debug Config.json
* Document new input APIs
* Isolate SDL2Driver to the project and remove external export of it
* Add support for external gamepad db mappings on SDL2
* Last clean up before PR
* Addresses first part of comments
* Address gdkchan's comments
* Do not use JsonException
* Last comment fixes
* Improve Buffer Textures and flush Image Stores
Fixes a number of issues with buffer textures:
- Reworked Buffer Textures to create their buffers in the TextureManager, then bind them with the BufferManager later.
- Fixes an issue where a buffer texture's buffer could be invalidated after it is bound, but before use.
- Fixed width unpacking for large buffer textures. The width is now 32-bit rather than 16.
- Force buffer textures to be rebound whenever any buffer is created, as using the handle id wasn't reliable, and the cost of binding isn't too high.
Fixes vertex explosions and flickering animations in UE4 games.
* Set ImageStore flag... for ImageStore.
* Check the offset and size.
* Initial implementation of buffer flush (VERY WIP)
* Host shaders need to be rebuilt for the SSBO write flag.
* New approach with reserved regions and gl sync
* Fix a ton of buffer issues.
* Remove unused buffer unmapped behaviour
* Revert "Remove unused buffer unmapped behaviour"
This reverts commit f1700e52fb8760180ac5e0987a07d409d1e70ece.
* Delete modified ranges on unmap
Fixes potential crashes in Super Smash Bros, where a previously modified range could lie on either side of an unmap.
* Cache some more delegates.
* Dispose Sync on Close
* Also create host sync for GPFifo syncpoint increment.
* Copy buffer optimization, add docs
* Fix race condition with OpenGL Sync
* Enable read tracking on CommandBuffer, insert syncpoint on WaitForIdle
* Performance: Only flush individual pages of SSBO at a time
This avoids flushing large amounts of data when only a small amount is actually used.
* Signal Modified rather than flushing after clear
* Fix some docs and code style.
* Introduce a new test for tracking memory protection.
Sucessfully demonstrates that the bug causing write protection to be cleared by a read action has been fixed. (these tests fail on master)
* Address Comments
* Add host sync for SetReference
This ensures that any indirect draws will correctly flush any related buffer data written before them. Fixes some flashing and misplaced world geometry in MH rise.
* Make PageAlign static
* Re-enable read tracking, for reads.
Here come Salieri, my implementation of a disk shader cache!
"I'm sure you know why I named it that."
"It doesn't really mean anything."
This implementation collects shaders at runtime and cache them to be later compiled when starting a game.
* WIP Range Tracking
- Texture invalidation seems to have large problems
- Buffer/Pool invalidation may have problems
- Mirror memory tracking puts an additional `add` in compiled code, we likely just want to make HLE access slower if this is the final solution.
- Native project is in the messiest possible location.
- [HACK] JIT memory access always uses native "fast" path
- [HACK] Trying some things with texture invalidation and views.
It works :)
Still a few hacks, messy things, slow things
More work in progress stuff (also move to memory project)
Quite a bit faster now.
- Unmapping GPU VA and CPU VA will now correctly update write tracking regions, and invalidate textures for the former.
- The Virtual range list is now non-overlapping like the physical one.
- Fixed some bugs where regions could leak.
- Introduced a weird bug that I still need to track down (consistent invalid buffer in MK8 ribbon road)
Move some stuff.
I think we'll eventually just put the dll and so for this in a nuget package.
Fix rebase.
[WIP] MultiRegionHandle variable size ranges
- Avoid reprotecting regions that change often (needs some tweaking)
- There's still a bug in buffers, somehow.
- Might want different api for minimum granularity
Fix rebase issue
Commit everything needed for software only tracking.
Remove native components.
Remove more native stuff.
Cleanup
Use a separate window for the background context, update opentk. (fixes linux)
Some experimental changes
Should get things working up to scratch - still need to try some things with flush/modification and res scale.
Include address with the region action.
Initial work to make range tracking work
Still a ton of bugs
Fix some issues with the new stuff.
* Fix texture flush instability
There's still some weird behaviour, but it's much improved without this. (textures with cpu modified data were flushing over it)
* Find the destination texture for Buffer->Texture full copy
Greatly improves performance for nvdec videos (with range tracking)
* Further improve texture tracking
* Disable Memory Tracking for view parents
This is a temporary approach to better match behaviour on master (where invalidations would be soaked up by views, rather than trigger twice)
The assumption is that when views are created to a texture, they will cover all of its data anyways. Of course, this can easily be improved in future.
* Introduce some tracking tests.
WIP
* Complete base tests.
* Add more tests for multiregion, fix existing test.
* Cleanup Part 1
* Remove unnecessary code from memory tracking
* Fix some inconsistencies with 3D texture rule.
* Add dispose tests.
* Use a background thread for the background context.
Rather than setting and unsetting a context as current, doing the work on a dedicated thread with signals seems to be a bit faster.
Also nerf the multithreading test a bit.
* Copy to texture with matching alignment
This extends the copy to work for some videos with unusual size, such as tutorial videos in SMO. It will only occur if the destination texture already exists at XCount size.
* Track reads for buffer copies. Synchronize new buffers before copying overlaps.
* Remove old texture flushing mechanisms.
Range tracking all the way, baby.
* Wake the background thread when disposing.
Avoids a deadlock when games are closed.
* Address Feedback 1
* Separate TextureCopy instance for background thread
Also `BackgroundContextWorker.InBackground` for a more sensible idenfifier for if we're in a background thread.
* Add missing XML docs.
* Address Feedback
* Maybe I should start drinking coffee.
* Some more feedback.
* Remove flush warning, Refocus window after making background context
* Initial implementation. Still pending better valid-overlap handling,
disposed pool, compressed format flush fix.
* Very messy backend resource cache.
* Oops
* Dispose -> Release
* Improve Release/Dispose.
* More rule refinement.
* View compatibility levels as an enum - you can always know if a view is only copy compatible.
* General cleanup.
Use locking on the resource cache, as it is likely to be used by other threads in future.
* Rename resource cache to resource pool.
* Address some of the smaller nits.
* Fix regression with MK8 lens flare
Texture flushes done the old way should trigger memory tracking.
* Use TextureCreateInfo as a key.
It now implements IEquatable and generates a hashcode based on width/height.
* Fix size change for compressed+non-compressed view combos.
Before, this could set either the compressed or non compressed texture with a size with the wrong size, depending on which texture had its size changed. This caused exceptions when flushing the texture.
Now it correctly takes the block size into account, assuming that these textures are only related because a pixel in the non-compressed texture represents a block in the compressed one.
* Implement JD's suggestion for HashCode Combine
Co-authored-by: jduncanator <1518948+jduncanator@users.noreply.github.com>
* Address feedback
* Address feedback.
Co-authored-by: jduncanator <1518948+jduncanator@users.noreply.github.com>
* Logger class changes only
Now compile-time checking is possible with the help of Nullable Value
types.
* Misc formatting
* Manual optimizations
PrintGuestLog
PrintGuestStackTrace
Surfaceflinger DequeueBuffer
* Reduce SendVibrationXX log level to Debug
* Add Notice log level
This level is always enabled and used to print system info, etc...
Also, rewrite LogColor to switch expression as colors are static
* Unify unhandled exception event handlers
* Print enabled LogLevels during init
* Re-add App Exit disposes in proper order
nit: switch case spacing
* Revert PrintGuestStackTrace to Info logs due to #1407
PrintGuestStackTrace is now called in some critical error handlers
so revert to old behavior as KThread isn't part of Guest.
* Batch replace Logger statements
* Initial transform feedback support
* Some nits and fixes
* Update ReportCounterType and Write method
* Can't change shader or TFB bindings while TFB is active
* Fix geometry shader input names with new naming
* Initial implementation of Render Target Scaling
Works with most games I have. No GUI option right now, it is hardcoded.
Missing handling for texelFetch operation.
* Realtime Configuration, refactoring.
* texelFetch scaling on fragment shader (WIP)
* Improve Shader-Side changes.
* Fix potential crash when no color/depth bound
* Workaround random uses of textures in compute.
This was blacklisting textures in a few games despite causing no bugs. Will eventually add full support so this doesn't break anything.
* Fix scales oscillating when changing between non-native scales.
* Scaled textures on compute, cleanup, lazier uniform update.
* Cleanup.
* Fix stupidity
* Address Thog Feedback.
* Cover most of GDK's feedback (two comments remain)
* Fix bad rename
* Move IsDepthStencil to FormatExtensions, add docs.
* Fix default config, square texture detection.
* Three final fixes:
- Nearest copy when texture is integer format.
- Texture2D -> Texture3D copy correctly blacklists the texture before trying an unscaled copy (caused driver error)
- Discount small textures.
* Remove scale threshold.
Not needed right now - we'll see if we run into problems.
* All CPU modification blacklists scale.
* Fix comment.
* Viewport swizzle support on NV and clip origin
* Initialize default viewport swizzle state, emulate viewport swizzle on shaders when not supported
* Address PR feedback
* Implementation of query queue and host conditional rendering
* Resolve some comments.
* Use overloads instead of passing object.
* Wake the consumer threads when incrementing syncpoints.
Also, do a busy loop when awaiting the counter for a blocking flush, rather than potentially sleeping the thread.
* Ensure there's a command between begin and end query.
Support shared color masks (used by Nouveau and maybe the NVIDIA
driver).
Support draw buffers (also required by OpenGL).
Support viewport transform disable (disabled for now as it breaks some
games).
Fix instanced rendering draw being ignored for multi draw.
Fix IADD and IADD3 immediate shader encodings, that was not matching
some ops.
Implement FFMA32I shader instruction.
Implement IMAD shader instruction.
