0
0
Fork 0
Commit graph

19 commits

Author SHA1 Message Date
Alex Barney
f4bbc019b9
Update to LibHac 0.15.0 (#2986) 2022-01-12 12:22:19 +01:00
gdkchan
0b1185284c
Fix GetAddrInfoWithOptions and some sockets issues (#2936)
* Fix GetAddrInfoWithOptions and some sockets issues

* Was not supposed to remove this log
2021-12-26 15:17:13 +01:00
sharmander
cb43cc7e32
UI - Add Volume Controls + Mute Toggle (F2) (#2871)
* Add the ability to toggle mute in the status bar.

* Add the ability to toggle mute in the status bar.

* Formatting fixes

* Add hotkey (F2) to mute

* Add default hotkey to config.json

* Add ability to change volume via slider.

* Fix Headless

* Fix SDL2 Problem : Credits to d3xMachina

* Remove unnecessary work

* Address gdk comments

* Toggling with Hotkey now properly restores volume to original level.

* Toggling with Hotkey now properly restores volume to original level.

* Update UI to show Volume % instead of Muted/Unmuted

* Clean up the volume ui a bit.

* Undo unintentionally committed code.

* Implement AudRen Support

* Restore intiial volume level in function definition.

* Finalize UI

* Finalize UI

* Use clamp for bounds check

* Use Math.Clamp for volume in soundio

* Address comments by gdkchan

* Address remaining comments

* Fix missing semicolon

* Address remaining gdkchan comment

* Fix comment

* Change /* to //

* Allow volume slider to change volume immediately.
Also force label text to cast to int to prevent decimals from showing in status bar

* Remove blank line

* Undo setting of volume level when "Cancel" is pressed.

* Fix allignment for settings window code
2021-12-23 13:33:56 -03:00
Ac_K
3f2486342b
gui: Replace FileChooserDialog by FileChooserNative (#2633)
We currently use the FileChooser from GTK, which is a bit mess. Instead of it we could use the native FileChooser from all specifics OS. This is what this PR attempt to fix.

It could be nice to get a test under linux since I've only tested it under Windows without any issues.

Fixes #2584
2021-09-14 23:52:08 +02:00
riperiperi
ec3e848d79
Add a Multithreading layer for the GAL, multi-thread shader compilation at runtime (#2501)
* Initial Implementation

About as fast as nvidia GL multithreading, can be improved with faster command queuing.

* Struct based command list

Speeds up a bit. Still a lot of time lost to resource copy.

* Do shader init while the render thread is active.

* Introduce circular span pool V1

Ideally should be able to use structs instead of references for storing these spans on commands. Will try that next.

* Refactor SpanRef some more

Use a struct to represent SpanRef, rather than a reference.

* Flush buffers on background thread

* Use a span for UpdateRenderScale.

Much faster than copying the array.

* Calculate command size using reflection

* WIP parallel shaders

* Some minor optimisation

* Only 2 max refs per command now.

The command with 3 refs is gone. 😌

* Don't cast on the GPU side

* Remove redundant casts, force sync on window present

* Fix Shader Cache

* Fix host shader save.

* Fixup to work with new renderer stuff

* Make command Run static, use array of delegates as lookup

Profile says this takes less time than the previous way.

* Bring up to date

* Add settings toggle. Fix Muiltithreading Off mode.

* Fix warning.

* Release tracking lock for flushes

* Fix Conditional Render fast path with threaded gal

* Make handle iteration safe when releasing the lock

This is mostly temporary.

* Attempt to set backend threading on driver

Only really works on nvidia before launching a game.

* Fix race condition with BufferModifiedRangeList, exceptions in tracking actions

* Update buffer set commands

* Some cleanup

* Only use stutter workaround when using opengl renderer non-threaded

* Add host-conditional reservation of counter events

There has always been the possibility that conditional rendering could use a query object just as it is disposed by the counter queue. This change makes it so that when the host decides to use host conditional rendering, the query object is reserved so that it cannot be deleted. Counter events can optionally start reserved, as the threaded implementation can reserve them before the backend creates them, and there would otherwise be a short amount of time where the counter queue could dispose the event before a call to reserve it could be made.

* Address Feedback

* Make counter flush tracked again.

Hopefully does not cause any issues this time.

* Wait for FlushTo on the main queue thread.

Currently assumes only one thread will want to FlushTo (in this case, the GPU thread)

* Add SDL2 headless integration

* Add HLE macro commands.

Co-authored-by: Mary <mary@mary.zone>
2021-08-27 00:31:29 +02:00
emmauss
77aab9aca3
Add Direct Mouse Support (#2374)
* and direct mouse support

* and direct mouse support

* hide cursor if mouse enabled

* add config

* update docs

* sorted usings
2021-06-24 02:09:08 +02:00
riperiperi
54ea2285f0
POWER - Performance Optimizations With Extensive Ramifications (#2286)
* Refactoring of KMemoryManager class

* Replace some trivial uses of DRAM address with VA

* Get rid of GetDramAddressFromVa

* Abstracting more operations on derived page table class

* Run auto-format on KPageTableBase

* Managed to make TryConvertVaToPa private, few uses remains now

* Implement guest physical pages ref counting, remove manual freeing

* Make DoMmuOperation private and call new abstract methods only from the base class

* Pass pages count rather than size on Map/UnmapMemory

* Change memory managers to take host pointers

* Fix a guest memory leak and simplify KPageTable

* Expose new methods for host range query and mapping

* Some refactoring of MapPagesFromClientProcess to allow proper page ref counting and mapping without KPageLists

* Remove more uses of AddVaRangeToPageList, now only one remains (shared memory page checking)

* Add a SharedMemoryStorage class, will be useful for host mapping

* Sayonara AddVaRangeToPageList, you served us well

* Start to implement host memory mapping (WIP)

* Support memory tracking through host exception handling

* Fix some access violations from HLE service guest memory access and CPU

* Fix memory tracking

* Fix mapping list bugs, including a race and a error adding mapping ranges

* Simple page table for memory tracking

* Simple "volatile" region handle mode

* Update UBOs directly (experimental, rough)

* Fix the overlap check

* Only set non-modified buffers as volatile

* Fix some memory tracking issues

* Fix possible race in MapBufferFromClientProcess (block list updates were not locked)

* Write uniform update to memory immediately, only defer the buffer set.

* Fix some memory tracking issues

* Pass correct pages count on shared memory unmap

* Armeilleure Signal Handler v1 + Unix changes

Unix currently behaves like windows, rather than remapping physical

* Actually check if the host platform is unix

* Fix decommit on linux.

* Implement windows 10 placeholder shared memory, fix a buffer issue.

* Make PTC version something that will never match with master

* Remove testing variable for block count

* Add reference count for memory manager, fix dispose

Can still deadlock with OpenAL

* Add address validation, use page table for mapped check, add docs

Might clean up the page table traversing routines.

* Implement batched mapping/tracking.

* Move documentation, fix tests.

* Cleanup uniform buffer update stuff.

* Remove unnecessary assignment.

* Add unsafe host mapped memory switch

On by default. Would be good to turn this off for untrusted code (homebrew, exefs mods) and give the user the option to turn it on manually, though that requires some UI work.

* Remove C# exception handlers

They have issues due to current .NET limitations, so the meilleure one fully replaces them for now.

* Fix MapPhysicalMemory on the software MemoryManager.

* Null check for GetHostAddress, docs

* Add configuration for setting memory manager mode (not in UI yet)

* Add config to UI

* Fix type mismatch on Unix signal handler code emit

* Fix 6GB DRAM mode.

The size can be greater than `uint.MaxValue` when the DRAM is >4GB.

* Address some feedback.

* More detailed error if backing memory cannot be mapped.

* SetLastError on all OS functions for consistency

* Force pages dirty with UBO update instead of setting them directly.

Seems to be much faster across a few games. Need retesting.

* Rebase, configuration rework, fix mem tracking regression

* Fix race in FreePages

* Set memory managers null after decrementing ref count

* Remove readonly keyword, as this is now modified.

* Use a local variable for the signal handler rather than a register.

* Fix bug with buffer resize, and index/uniform buffer binding.

Should fix flickering in games.

* Add InvalidAccessHandler to MemoryTracking

Doesn't do anything yet

* Call invalid access handler on unmapped read/write.

Same rules as the regular memory manager.

* Make unsafe mapped memory its own MemoryManagerType

* Move FlushUboDirty into UpdateState.

* Buffer dirty cache, rather than ubo cache

Much cleaner, may be reusable for Inline2Memory updates.

* This doesn't return anything anymore.

* Add sigaction remove methods, correct a few function signatures.

* Return empty list of physical regions for size 0.

* Also on AddressSpaceManager

Co-authored-by: gdkchan <gab.dark.100@gmail.com>
2021-05-24 22:52:44 +02:00
Mary
bec67dbef7
misc: Move configuration management to the Ryujinx project (#2269)
* Decouple configuration from Ryujinx.HLE and Ryujinx.Input

* Move Configuration to the Ryujinx project
2021-05-16 17:12:14 +02:00
Mary
eb056218a1
audio: Implement a SDL2 backend (#2258)
* audio: Implement a SDL2 backend

This adds support to SDL2 as an audio backend.
It has the same compatibility level as OpenAL without its issues.

I also took the liberty of restructuring the SDL2 code to have one
shared project between audio and input.

The configuration version was also incremented.

* Address gdkchan's comments

* Fix update logic

* Add an heuristic to pick the correct target sample count wanted by the game

* Address gdkchan's comments

* Address Ac_k's comments

* Fix audren output

* Address gdkchan's comments
2021-05-05 23:37:09 +02:00
Mary
6cb22c9d38
Miria: The Death of OpenTK 3 (#2194)
* openal: Update to OpenTK 4

* Ryujinx.Graphics.OpenGL: Update to OpenTK 4

* Entirely removed OpenTK 3, still wip

* Use SPB for context creation and handling

Still need to test on GLX and readd input support

* Start implementing a new input system

So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal

Button mapping backend is implemented

TODO: front end, configuration handling and configuration migration
TODO: keyboard support

* Enforce RGB only framebuffer on the GLWidget

Fix possible transparent window

* Implement UI gamepad frontend

Also fix bad mapping of minus button and ensure gamepad config is updated in real time

* Handle controller being disconnected and reconnected again

* Revert "Enforce RGB only framebuffer on the GLWidget"

This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965.

* Fix first color clear

* Filter SDL2 events a bit

* Start working on the keyboard detail

- Rework configuration classes a bit to be more clean.
- Integrate fully the keyboard configuration to the front end (TODO: assigner)
- Start skeleton for the GTK3 keyboard driver

* Add KeyboardStateSnapshot and its integration

* Implement keyboard assigner and GTK3 key mapping

TODO: controller configuration mapping and IGamepad implementation for keyboard

* Add missing SR and SL definitions

* Fix copy pasta mistake on config for previous commit

* Implement IGamepad interface for GTK3 keyboard

* Fix some implementation still being commented in the controller ui for keyboard

* Port screen handle code

* Remove all configuration management code and move HidNew to Hid

* Rename InputConfigNew to InputConfig

* Add a version field to the input config

* Prepare serialization and deserialization of new input config and migrate profile loading and saving

* Support input configuration saving to config and bump config version to 23.

* Clean up in ConfigurationState

* Reference SPB via a nuget package

* Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2

* move GTK3 input to the right directory

* Fix triggers on SDL2

* Update to SDL2 2.0.14 via our own fork

* Update buttons definition for SDL2 2.0.14 and report gamepad features

* Implement motion support again with SDL2

TODO: cemu hooks integration

* Switch to latest of nightly SDL2

* SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index

* Ensure values are set in UI when the gamepad get hot plugged

* Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids

This fixes permanent rumble of pro controller in some hotplug scenario

* Fix more UI bugs

* Move legcay motion code around before reintegration

* gamecontroller UI tweaks here and there

* Hide Motion on non motion configurations

* Update the TODO grave

Some TODO were fixed long time ago or are quite oudated...

* Integrate cemu hooks motion configuration

* Integrate cemu hooks configuration options to the UI again

* cemuhooks => cemuhooks

* Add cemu hook support again

* Fix regression on normal motion and fix some very nasty bugs around

* Fix for XCB multithreads issue on Linux

* Enable motion by default

* Block inputs in the main view when in the controller configuration window

* Some fixes for the controller ui again

* Add joycon support and fixes other hints

* Bug fixes and clean up

- Invert default mapping if not a Nintendo controller
- Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment)
- Clean up hints in use
- Remove debug logs around
- Fixes potential double free with SDL2Gamepad

* Move the button assigner and motion logic to the Ryujinx.Input project

* Reimplement raw keyboard hle input

Also move out the logic of the hotkeys

* Move all remaining Input manager stuffs to the Ryujinx.Input project

* Increment configuration version yet again because of master changes

* Ensure input config isn't null when not present

* Fixes for VS not being nice

* Fix broken gamepad caching logic causing crashes on ui

* Ensure the background context is destroyed

* Update dependencies

* Readd retrocompat with old format of the config to avoid parsing and crashes on those versions

Also updated the debug Config.json

* Document new input APIs

* Isolate SDL2Driver to the project and remove external export of it

* Add support for external gamepad db mappings on SDL2

* Last clean up before PR

* Addresses first part of comments

* Address gdkchan's comments

* Do not use JsonException

* Last comment fixes
2021-04-14 12:28:43 +02:00
Mark Araujo
faa654dbaf
Improves logging to console. (#2146)
* Restore removed text

* Adds more items to logs:

- Remove #1942

* Further removal of changes from #1942

* Removes hardcoded config state variables for logging
- Adds Configuration logging

* Decoupled logging from ReactiveObject
- Event handler added to Configuration state to handle logging of value changes

* Decoupled logging from ReactiveObject
- Event handler added to Configuration state to handle logging of value changes
2021-04-13 21:58:47 +02:00
gdkchan
874540bb5c
Allow DRAM size to be increased from 4GB to 6GB (#2174)
* Allow DRAM size to be increased from 4GB to 6GB

* Add option on the UI
2021-04-04 14:06:59 +02:00
Joshi234
a8c945f35f
Add items to standard logs (#1942)
* Added more items to log

* Update MainWindow.cs

* Added log when changing settings

* fix formating and add log when toggling vsync and docked

* Update Ryujinx/Ui/MainWindow.cs

Co-authored-by: Ac_K <Acoustik666@gmail.com>

* Update Ryujinx/Ui/MainWindow.cs

Co-authored-by: Ac_K <Acoustik666@gmail.com>

* Update Ryujinx/Ui/Windows/SettingsWindow.cs

Co-authored-by: Ac_K <Acoustik666@gmail.com>

* Fix formating

* Change Location according to suggestion

* Implemented OpenDataStorageWithProgramIndex

* Update IFileSystemProxy.cs

* Update IFileSystemProxy.cs

* Commited that file on accidant

* Revert "Merge branch 'master' of https://github.com/Joshi234/Ryujinx"

This reverts commit 375f43045507bc12e743ae1babc6f47bd72987f5, reversing
changes made to 672e2c8f7da28160f2f575a16aaa135d232bf655.

* Revert "Update IFileSystemProxy.cs"

This reverts commit 672e2c8f7da28160f2f575a16aaa135d232bf655.

* Update IFileSystemProxy.cs

* Update ISystemSettingsServer.cs

* removed accidantel addition of IFileSystemProxy.OpenDataStorageWithProgramIndex

* Fix formating and add missing stub

* Update ISystemSettingsServer.cs

* Added more items to log

* Update MainWindow.cs

* Added log when changing settings

* fix formating and add log when toggling vsync and docked

* Fix formating

* Update Ryujinx/Ui/MainWindow.cs

Co-authored-by: Ac_K <Acoustik666@gmail.com>

* Update Ryujinx/Ui/MainWindow.cs

Co-authored-by: Ac_K <Acoustik666@gmail.com>

* Update Ryujinx/Ui/Windows/SettingsWindow.cs

Co-authored-by: Ac_K <Acoustik666@gmail.com>

* Change Location according to suggestion

* Fix Rebase stuff

* Change Logger.Notice to Loger.Info

* Update ISystemSettingsServer.cs

* Update ISystemSettingsServer.cs

Co-authored-by: Ac_K <Acoustik666@gmail.com>
2021-03-19 00:09:33 +01:00
Mary
f556c80d02
Haydn: Part 1 (#2007)
* Haydn: Part 1

Based on my reverse of audio 11.0.0.

As always, core implementation under LGPLv3 for the same reasons as for Amadeus.

This place the bases of a more flexible audio system while making audout & audin accurate.

This have the following improvements:
- Complete reimplementation of audout and audin.
- Audin currently only have a dummy backend.
- Dramatically reduce CPU usage by up to 50% in common cases (SoundIO and OpenAL).
- Audio Renderer now can output to 5.1 devices when supported.
- Audio Renderer init its backend on demand instead of keeping two up all the time.
- All backends implementation are now in their own project.
- Ryujinx.Audio.Renderer was renamed Ryujinx.Audio and was refactored because of this.

As a note, games having issues with OpenAL haven't improved and will not
because of OpenAL design (stopping when buffers finish playing causing
possible audio "pops" when buffers are very small).

* Update for latest hexkyz's edits on Switchbrew

* audren: Rollback channel configuration changes

* Address gdkchan's comments

* Fix typo in OpenAL backend driver

* Address last comments

* Fix a nit

* Address gdkchan's comments
2021-02-26 01:11:56 +01:00
sharmander
d5081e3f93
Make windows DPI aware to display properly on high-resolution screens. (#1983)
* Make Windows DPI aware to display properly on high-resolution screens.

* remove empty line

* Don't use app manifest, set process dpi aware programatically.

Store variables in Program.cs for use instead of re-creating them per class/ method.

* Fix for linux/osx

* Add braces

* Re-use manifest. It appears to be required on linux.

* Undo previous commit -- it appears linux was simply never affected.

* Addressed AcK's comments

* Remove unused usings

* Address comments by AcK #2

* Re-order

* Move FromHwnd call to ForceDpiAware class. Wrap in Try-Catch to prevent crashes on systems that don't support it.

* Additional code cleanup

* Remove "global::" reference.
2021-02-20 01:34:41 +01:00
pineappleEA
6f1d964801
Hide Cursor On Idle (#1993)
* Implement "Hide Cursor On Idle" option

Adds a general option to autohide the cursor after 8s have elapsed.

* Fix cursor not hiding on Windows and dispose it

* Don't dispose cursor, fix var names

* Abide by the GNOME documentation

* Fix nits

* Disabled by default, make it so it doesn't utilize any timer

* Remove *NIX time and extra lines

* Don't calculate if option is disabled

* Move if case

* Fix alignment
2021-02-15 22:48:21 +01:00
pineappleEA
4da6742861
Fix Linux Icon (#1927) 2021-01-19 07:33:58 +11:00
Bruno Macabeus
1e5b37c94f
settings: add Show Confirm Exist toggle (#1856) 2021-01-14 23:30:52 +01:00
Ac_K
a9cb31e75f
gui: Refactoring Part 1 (#1859)
* gui: Refactoring Part 1

* Fix ProfileDialog.glade path

* Fix Application.Quit assert

* Fix TitleUpdateWindow parent

* Fix TitleUpdate selected item

* Remove extra line in TitleUpdateWindow

* Fix empty assign of Enum.TryParse

* Add Patrons list in the About Window

* update about error messages
2021-01-08 09:14:13 +01:00
Renamed from Ryujinx/Ui/SettingsWindow.cs (Browse further)