* misc: Add credit to AmiiboAPI properly and fix a warning disable
This PR adds a properly credit to AmiiboAPI which is used in our Amiibo emulation in the Readme and in the about window.
I've changed a wrong warning code added in a recent PR too.
* Update README.md
* Fix aligment
* Add initial implementation of the Tamper Machine
* Implement Atmosphere opcodes 0, 4 and 9
* Add missing TamperCompilationException class
* Implement Atmosphere conditional and loop opcodes 1, 2 and 3
* Inplement input conditional opcode 8
* Add register store opcode A
* Implement extended pause/resume opcodes FF0 and FF1
* Implement extended log opcode FFF
* Implement extended register conditional opcode C0
* Refactor TamperProgram to an interface
* Moved Atmosphere classes to a separate subdirectory
* Fix OpProcCtrl class not setting process
* Implement extended register save/restore opcodes C1, C2 and C3
* Refactor code emitters to separate classes
* Supress memory access errors from the Tamper Machine
* Add debug information to tamper register and memory writes
* Add block stack check to Atmosphere Cheat compiler
* Add handheld input support to Tamper Machine
* Fix code styling
* Fix build id and cheat case mismatch
* Fix invalid immediate size selection
* Print build ids of the title
* Prevent Tamper Machine from change code regions
* Remove Atmosphere namespace
* Remove empty cheats from the list
* Prevent code modification without disabling the tampering
* Fix missing addressing mode in LoadRegisterWithMemory
* Fix wrong addressing in RegisterConditional
* Add name to the tamper machine thread
* Fix code styling
Signal and setup events correctly
Eliminate possible races
Use a single event
Mark volatiles and reduce scope of waithandles
Common handler
100ms -> 50ms
* Minor wording fixes
* Exit dialogue.
* Update MainWindow.cs
* Update DlcWindow.cs
* I found an actual typo for once.
* There we go.
* Fix
* Update MainWindow.cs
* MainWindow is done
* Update ControllerWindow.cs
* Haydn: Part 1
Based on my reverse of audio 11.0.0.
As always, core implementation under LGPLv3 for the same reasons as for Amadeus.
This place the bases of a more flexible audio system while making audout & audin accurate.
This have the following improvements:
- Complete reimplementation of audout and audin.
- Audin currently only have a dummy backend.
- Dramatically reduce CPU usage by up to 50% in common cases (SoundIO and OpenAL).
- Audio Renderer now can output to 5.1 devices when supported.
- Audio Renderer init its backend on demand instead of keeping two up all the time.
- All backends implementation are now in their own project.
- Ryujinx.Audio.Renderer was renamed Ryujinx.Audio and was refactored because of this.
As a note, games having issues with OpenAL haven't improved and will not
because of OpenAL design (stopping when buffers finish playing causing
possible audio "pops" when buffers are very small).
* Update for latest hexkyz's edits on Switchbrew
* audren: Rollback channel configuration changes
* Address gdkchan's comments
* Fix typo in OpenAL backend driver
* Address last comments
* Fix a nit
* Address gdkchan's comments
* This should fix issue #1374 in Linux
Changes:
- Bind buttons by detecting the transition from down to up.
- Bind axis by detecting movement from value higher than 50% to a value lower than 50%.
Caveats:
- I have tested only with DS3 in Linux (Fedora 32).
- ZL and ZR detection works by accident. This code doesn't take negative axis into account.
The reason it works is because axis are managed in absolute value. So when pressing ZL/ZR
axis value goes from -1 to 1 (or 1 to 0 and back to 1) and this hits the axis detector.
- Likely I have broken all the other controllers xD (testing needed).
* Assign keyboardPressed
* Make a more robust detection of pressed buttons when using a controller
* Add interface to bind buttons from Joystick and Keyboard
* Fix style issues after code review by @AcK77 (Thanks!)
* Move new classes to Ryujinx.Ui.Input namespace
* Use explicit types instead of var
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add a new empty line before
* Up
Co-authored-by: Jose Padilla <jose@prensalink.com>
Co-authored-by: Mary <thog@protonmail.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Make Windows DPI aware to display properly on high-resolution screens.
* remove empty line
* Don't use app manifest, set process dpi aware programatically.
Store variables in Program.cs for use instead of re-creating them per class/ method.
* Fix for linux/osx
* Add braces
* Re-use manifest. It appears to be required on linux.
* Undo previous commit -- it appears linux was simply never affected.
* Addressed AcK's comments
* Remove unused usings
* Address comments by AcK #2
* Re-order
* Move FromHwnd call to ForceDpiAware class. Wrap in Try-Catch to prevent crashes on systems that don't support it.
* Additional code cleanup
* Remove "global::" reference.
* Implement "Hide Cursor On Idle" option
Adds a general option to autohide the cursor after 8s have elapsed.
* Fix cursor not hiding on Windows and dispose it
* Don't dispose cursor, fix var names
* Abide by the GNOME documentation
* Fix nits
* Disabled by default, make it so it doesn't utilize any timer
* Remove *NIX time and extra lines
* Don't calculate if option is disabled
* Move if case
* Fix alignment
* Update Joy-Con Images 2
This Updates the Joy-Con images, Changes include, adding a top view to the {Joy-Con Pair} image and {Joy-Con Left and Right} Images and adding a side view to {Joy-Con Left and Right} images, the colours
should be less washed out as well and I also decided to clean up the raw image because even though you could not see it in the GUI, the Images themselves looked very messy when opened in a Vector tool
* Fix Sily Right Joy Con mistake
* Make ZL and ZR more visable
- Bind toggle events after setting up their current values. This fixes the issue where the config is saved 10 times when the main window is opened 😬
- Write to disk immediately to decrease the chances of corruption
* Initial Setup: Reload keys before verifying firmware
Also, display the NoKeys dialog if keyset is empty when verifying
firmware.
* LoadApplications: Remove the lone debug log and print the error directly
Currently, when configuring controller input with an "Xinput Controller" or "Unmapped Controller", the window does not fit the images for Pro Controller (width limited) or Joycon Pair (width and height limited). This PR proportionally enlarges the window so that no scrolling is ever necessary to fully see the controller image.
This updates the old Images used for the input section for Ryujinx. The old one didn't play nice with the some GTK themes like light mode, this new one does.
Fixes the crashes on linux when you stop emulation, and when you try to
exit the emulator while a game is running.
Also tested on windows without problems on my side.
* gui: Refactoring Part 1
* Fix ProfileDialog.glade path
* Fix Application.Quit assert
* Fix TitleUpdateWindow parent
* Fix TitleUpdate selected item
* Remove extra line in TitleUpdateWindow
* Fix empty assign of Enum.TryParse
* Add Patrons list in the About Window
* update about error messages
* Interrupt GPU command processing when a frame's fence is reached.
* Accumulate times rather than %s
* Accurate timer for vsync
Spin wait for the last .667ms of a frame. Avoids issues caused by signalling 16ms vsync. (periodic stutters in smo)
* Use event wait for better timing.
* Fix lazy wait
Windows doesn't seem to want to do 1ms consistently, so force a spin if we're less than 2ms.
* A bit more efficiency on frame waits.
Should now wait the remainder 0.6667 instead of 1.6667 sometimes (odd waits above 1ms are reliable, unlike 1ms waits)
* Better swap interval 0 solution
737 fps without breaking a sweat. Downside: Vsync can no longer be disabled on games that use the event heavily (link's awakening - which is ok since it breaks anyways)
* Fix comment.
* Address Comments.
* am/gui: Implement Wake-up message.
This implement the ability to send a Wake-up (Resume) message to the guest.
Sometime games needs to Sleep and Wake-up the switch to unlock some ingame features.
* Address gdkchan feedback
* Thread create/delete stutter workarounds Pt 1
* As tiered compilation is disabled, disable quick jit too
Should result in tier 1 compilation all the time
* Fix rebase.
* Rewrite scheduler context switch code
* Fix race in UnmapIpcRestorePermission
* Fix thread exit issue that could leave the scheduler in a invalid state
* Change context switch method to not wait on guest thread, remove spin wait, use SignalAndWait to pass control
* Remove multi-core setting (it is always on now)
* Re-enable assert
* Remove multicore from default config and schema
* Fix race in KTimeManager
* IPC refactor part 2: Use ReplyAndReceive on HLE services and remove special handling from kernel
* Fix for applet transfer memory + some nits
* Keep handles if possible to avoid server handle table exhaustion
* Fix IPC ZeroFill bug
* am: Correctly implement CreateManagedDisplayLayer and implement CreateManagedDisplaySeparableLayer
CreateManagedDisplaySeparableLayer is requires since 10.x+ when appletResourceUserId != 0
* Make it exit properly
* Make ServiceNotImplementedException show the full message again
* Allow yielding execution to avoid starving other threads
* Only wait if active
* Merge IVirtualMemoryManager and IAddressSpaceManager
* Fix Ro loading data from the wrong process
Co-authored-by: Thog <me@thog.eu>
This is an issue happening when you change your datetime format on your
system and try to sort via last played datetime. DateTime.Parse use the
current thread culture and will not parse date correctly, effectively
causing a crash.
As such, I added a check when loading the game list that ensure that the
datetime is valid in current culture.
Fix#1727.
* gui: Toggle between docked/handheld mode by clicking status bar
This PR just add a way to toggle between the docked and the handheld mode by clicking the lable in the status bar.
Nothing more.
* Fix glade file formatting
* Add VSync toggle
* shader cache: Fix Linux boot issues
This rollback the init logic back to previous state, and replicate the
way PTC handle initialization.
* shader cache: set default state of ready for translation event to false
* Fix cpu unit tests
* Standardize to camel-case: option to check for updates on launch
Updates the "Check for updates on launch" to read instead "Check For Updates On Launch" to be consistent with camel-case options elsewhere in the UI. This time done with manual editing instead of with the Glade app.
* Updated to match general English rules on articles and conjunctions
* SettingsWindow: Add an Apply button
Adds an apply button that doesnt close the settings window when saving
the changes.
* fix the apply button staying turned on after clicking it
Here come Salieri, my implementation of a disk shader cache!
"I'm sure you know why I named it that."
"It doesn't really mean anything."
This implementation collects shaders at runtime and cache them to be later compiled when starting a game.
* fix stalling when server is offline
* add retry timer to fail server connections, fix alt slot number
* fix alt slot key issue
* fix crash when saving controller config with empty fields
* code fixes
* add index check in motion hid update, made HandleResponse async
Co-authored-by: Emmanuel <nhv3@localhost.localdomain>
