The debug configuration can be created by the emulator and is an
artefact of the past.
I also took the liberty of removing the _schema.json file as most of the
time it is left unused/outdated.
* Remove usage of Mono.Posix.NETStandard in Ryujinx project
* Remove usage of Mono.Posix.NETStandard in ARMeilleure project
* Remove usage of Mono.Posix.NETStandard in Ryujinx.Memory project
* Address gdkchan's comments
* Don't blow up everything if a DLC file is missing
* change comment
* More correctly setting the "enabled" check box on dlc dialog for the add-on NSP based on the enabled state of all NCAs in the package.
* Update Ryujinx.HLE/HOS/ApplicationLoader.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
Co-authored-by: Logan Stromberg <lostromb@microsoft.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* infra: Migrate to .NET 6
* Rollback version naming change
* Workaround .NET 6 ZipArchive API issues
* ci: Switch to VS 2022 for AppVeyor
CI is now ready for .NET 6
* Suppress WebClient warning in DoUpdateWithMultipleThreads
* Attempt to workaround System.Drawing.Common changes on 6.0.0
* Change keyboard rendering from System.Drawing to ImageSharp
* Make the software keyboard renderer multithreaded
* Bump ImageSharp version to 1.0.4 to fix a bug in Image.Load
* Add fallback fonts to the keyboard renderer
* Fix warnings
* Address caian's comment
* Clean up linux workaround as it's uneeded now
* Update readme
Co-authored-by: Caian Benedicto <caianbene@gmail.com>
* Disable Pause/Resume menu instead of trying to hide them
* Fix Resume menu being active before renderer starts
* Fix emulator not being able to close properly
We currently use the FileChooser from GTK, which is a bit mess. Instead of it we could use the native FileChooser from all specifics OS. This is what this PR attempt to fix.
It could be nice to get a test under linux since I've only tested it under Windows without any issues.
Fixes#2584
* Add a "Pause Emulation" option and hotkey
Closes Ryujinx#1604
* Refactoring how pause is handled
* Applied suggested changes from review
* Applied suggested fixes
* Pass correct suspend type to threads for suspend/resume
* Fix NRE after stoping emulation
* Removing SimulateWakeUpMessage call after resuming emulation
* Skip suspending non game process
* Pause the tickCounter in the ExecutionContext
* Refactoring tickCounter pause/resume as suggested
* Fix Config migration to add pause hotkey
* Fixed pausing only application threads
* Fix exiting emulator while paused
* Avoid pause/resume while already paused/resumed
* Cleanup unused code
* Avoid restarting audio if stopping emulation while in pause.
* Added suggested changes
* Fix ConfigurationState
* Initial Implementation
About as fast as nvidia GL multithreading, can be improved with faster command queuing.
* Struct based command list
Speeds up a bit. Still a lot of time lost to resource copy.
* Do shader init while the render thread is active.
* Introduce circular span pool V1
Ideally should be able to use structs instead of references for storing these spans on commands. Will try that next.
* Refactor SpanRef some more
Use a struct to represent SpanRef, rather than a reference.
* Flush buffers on background thread
* Use a span for UpdateRenderScale.
Much faster than copying the array.
* Calculate command size using reflection
* WIP parallel shaders
* Some minor optimisation
* Only 2 max refs per command now.
The command with 3 refs is gone. 😌
* Don't cast on the GPU side
* Remove redundant casts, force sync on window present
* Fix Shader Cache
* Fix host shader save.
* Fixup to work with new renderer stuff
* Make command Run static, use array of delegates as lookup
Profile says this takes less time than the previous way.
* Bring up to date
* Add settings toggle. Fix Muiltithreading Off mode.
* Fix warning.
* Release tracking lock for flushes
* Fix Conditional Render fast path with threaded gal
* Make handle iteration safe when releasing the lock
This is mostly temporary.
* Attempt to set backend threading on driver
Only really works on nvidia before launching a game.
* Fix race condition with BufferModifiedRangeList, exceptions in tracking actions
* Update buffer set commands
* Some cleanup
* Only use stutter workaround when using opengl renderer non-threaded
* Add host-conditional reservation of counter events
There has always been the possibility that conditional rendering could use a query object just as it is disposed by the counter queue. This change makes it so that when the host decides to use host conditional rendering, the query object is reserved so that it cannot be deleted. Counter events can optionally start reserved, as the threaded implementation can reserve them before the backend creates them, and there would otherwise be a short amount of time where the counter queue could dispose the event before a call to reserve it could be made.
* Address Feedback
* Make counter flush tracked again.
Hopefully does not cause any issues this time.
* Wait for FlushTo on the main queue thread.
Currently assumes only one thread will want to FlushTo (in this case, the GPU thread)
* Add SDL2 headless integration
* Add HLE macro commands.
Co-authored-by: Mary <mary@mary.zone>
* First working vibration implementation
* Fix Infinite Rumble in SDL2Mouse
* Stop ignoring one vibValues every 2
* Remove RumbleInfinity as suggested
* Reworked all the vibration handle / calculation
* Revert HidVibrationDevicePosition changes
* Add UI to enable and tune rumble
* Remove some stub logs
* Add PlayerIndex in rumble debug log
* Fix all requested changes
* Implements hid::GetVibrationDeviceInfo
* Better implements HidVibrationValue.Equals/GetHashCode
* Added requested changes from code review
* Last fixes from review
* Update configuration file version for rebase
* Make audio disposal thread safe on all 3 backends
* Make OpenAL more consistent with the other backends
* Remove Window.Cursor = null, and change dummy TValue to byte
Update the LibHac dependency to version 0.13.1. This brings a ton of improvements and changes such as:
- Refactor `FsSrv` to match the official refactoring done in FS.
- Change how the `Horizon` and `HorizonClient` classes are handled. Each client created represents a different process with its own process ID and client state.
- Add FS access control to handle permissions for FS service method calls.
- Add FS program registry to keep track of the program ID, location and permissions of each process.
- Add FS program index map info manager to track the program IDs and indexes of multi-application programs.
- Add all FS IPC interfaces.
- Rewrite `Fs.Fsa` code to be more accurate.
- Rewrite a lot of `FsSrv` code to be more accurate.
- Extend directory save data to store `SaveDataExtraData`
- Extend directory save data to lock the save directory to allow only one accessor at a time.
- Improve waiting and retrying when encountering access issues in `LocalFileSystem` and `DirectorySaveDataFileSystem`.
- More `IFileSystemProxy` methods should work now.
- Probably a bunch more stuff.
On the Ryujinx side:
- Forward most `IFileSystemProxy` methods to LibHac.
- Register programs and program index map info when launching an application.
- Remove hacks and workarounds for missing LibHac functionality.
- Recreate missing save data extra data found on emulator startup.
- Create system save data that wasn't indexed correctly on an older LibHac version.
`FsSrv` now enforces access control for each process. When a process tries to open a save data file system, FS reads the save's extra data to determine who the save owner is and if the caller has permission to open the save data. Previously-created save data did not have extra data created when the save was created.
With access control checks in place, this means that processes with no permissions (most games) wouldn't be able to access their own save data. The extra data can be partially created from data in the save data indexer, which should be enough for access control purposes.
There is a wrong condition in `GetShrinkedGamepadName` which throw an oob if the controller name is equal to the checked value. It's now fixed and shoud closes#2442 .
* no name: Mii Editor applet support
* addresses gdkchan feedback
* Fix comment
* Bypass MountCounter of MiiDatabaseManager
* Fix GetSettingsPlatformRegion
* Disable Applet Menu for unsupported firmwares
* Refactoring of KMemoryManager class
* Replace some trivial uses of DRAM address with VA
* Get rid of GetDramAddressFromVa
* Abstracting more operations on derived page table class
* Run auto-format on KPageTableBase
* Managed to make TryConvertVaToPa private, few uses remains now
* Implement guest physical pages ref counting, remove manual freeing
* Make DoMmuOperation private and call new abstract methods only from the base class
* Pass pages count rather than size on Map/UnmapMemory
* Change memory managers to take host pointers
* Fix a guest memory leak and simplify KPageTable
* Expose new methods for host range query and mapping
* Some refactoring of MapPagesFromClientProcess to allow proper page ref counting and mapping without KPageLists
* Remove more uses of AddVaRangeToPageList, now only one remains (shared memory page checking)
* Add a SharedMemoryStorage class, will be useful for host mapping
* Sayonara AddVaRangeToPageList, you served us well
* Start to implement host memory mapping (WIP)
* Support memory tracking through host exception handling
* Fix some access violations from HLE service guest memory access and CPU
* Fix memory tracking
* Fix mapping list bugs, including a race and a error adding mapping ranges
* Simple page table for memory tracking
* Simple "volatile" region handle mode
* Update UBOs directly (experimental, rough)
* Fix the overlap check
* Only set non-modified buffers as volatile
* Fix some memory tracking issues
* Fix possible race in MapBufferFromClientProcess (block list updates were not locked)
* Write uniform update to memory immediately, only defer the buffer set.
* Fix some memory tracking issues
* Pass correct pages count on shared memory unmap
* Armeilleure Signal Handler v1 + Unix changes
Unix currently behaves like windows, rather than remapping physical
* Actually check if the host platform is unix
* Fix decommit on linux.
* Implement windows 10 placeholder shared memory, fix a buffer issue.
* Make PTC version something that will never match with master
* Remove testing variable for block count
* Add reference count for memory manager, fix dispose
Can still deadlock with OpenAL
* Add address validation, use page table for mapped check, add docs
Might clean up the page table traversing routines.
* Implement batched mapping/tracking.
* Move documentation, fix tests.
* Cleanup uniform buffer update stuff.
* Remove unnecessary assignment.
* Add unsafe host mapped memory switch
On by default. Would be good to turn this off for untrusted code (homebrew, exefs mods) and give the user the option to turn it on manually, though that requires some UI work.
* Remove C# exception handlers
They have issues due to current .NET limitations, so the meilleure one fully replaces them for now.
* Fix MapPhysicalMemory on the software MemoryManager.
* Null check for GetHostAddress, docs
* Add configuration for setting memory manager mode (not in UI yet)
* Add config to UI
* Fix type mismatch on Unix signal handler code emit
* Fix 6GB DRAM mode.
The size can be greater than `uint.MaxValue` when the DRAM is >4GB.
* Address some feedback.
* More detailed error if backing memory cannot be mapped.
* SetLastError on all OS functions for consistency
* Force pages dirty with UBO update instead of setting them directly.
Seems to be much faster across a few games. Need retesting.
* Rebase, configuration rework, fix mem tracking regression
* Fix race in FreePages
* Set memory managers null after decrementing ref count
* Remove readonly keyword, as this is now modified.
* Use a local variable for the signal handler rather than a register.
* Fix bug with buffer resize, and index/uniform buffer binding.
Should fix flickering in games.
* Add InvalidAccessHandler to MemoryTracking
Doesn't do anything yet
* Call invalid access handler on unmapped read/write.
Same rules as the regular memory manager.
* Make unsafe mapped memory its own MemoryManagerType
* Move FlushUboDirty into UpdateState.
* Buffer dirty cache, rather than ubo cache
Much cleaner, may be reusable for Inline2Memory updates.
* This doesn't return anything anymore.
* Add sigaction remove methods, correct a few function signatures.
* Return empty list of physical regions for size 0.
* Also on AddressSpaceManager
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
I found some mistake I made back when I first wrote the mapping for
Miria.
This fix:
- an offset by one after the tilde key in the mapping.
- F30 being mapped to F29.
This fix an issue when after a relaunch of a game containing other
games (embedded games), the renderer window size would be 1x1.
This bug was introduced by #2260.
* audio: Implement a SDL2 backend
This adds support to SDL2 as an audio backend.
It has the same compatibility level as OpenAL without its issues.
I also took the liberty of restructuring the SDL2 code to have one
shared project between audio and input.
The configuration version was also incremented.
* Address gdkchan's comments
* Fix update logic
* Add an heuristic to pick the correct target sample count wanted by the game
* Address gdkchan's comments
* Address Ac_k's comments
* Fix audren output
* Address gdkchan's comments
* gtk3: Add base for future Vulkan integration
This PR puts in place the fondation for the future Vulkan integration on
the GTK3 UI.
This also updated SPB to 0.0.3-build14 that fixed a use after free on
XErrorHandler on Linux.
* Address rip's comments
* Merge GLWidget inside GLRenderer
* Clean up and deduplicate renderer implementations
* Address shahil's comments
* Address Ac_K's comments
* Address gdkchan's comments
* openal: Update to OpenTK 4
* Ryujinx.Graphics.OpenGL: Update to OpenTK 4
* Entirely removed OpenTK 3, still wip
* Use SPB for context creation and handling
Still need to test on GLX and readd input support
* Start implementing a new input system
So far only gamepad are supported, no configuration possible via UI but detected via hotplug/removal
Button mapping backend is implemented
TODO: front end, configuration handling and configuration migration
TODO: keyboard support
* Enforce RGB only framebuffer on the GLWidget
Fix possible transparent window
* Implement UI gamepad frontend
Also fix bad mapping of minus button and ensure gamepad config is updated in real time
* Handle controller being disconnected and reconnected again
* Revert "Enforce RGB only framebuffer on the GLWidget"
This reverts commit 0949715d1a03ec793e35e37f7b610cbff2d63965.
* Fix first color clear
* Filter SDL2 events a bit
* Start working on the keyboard detail
- Rework configuration classes a bit to be more clean.
- Integrate fully the keyboard configuration to the front end (TODO: assigner)
- Start skeleton for the GTK3 keyboard driver
* Add KeyboardStateSnapshot and its integration
* Implement keyboard assigner and GTK3 key mapping
TODO: controller configuration mapping and IGamepad implementation for keyboard
* Add missing SR and SL definitions
* Fix copy pasta mistake on config for previous commit
* Implement IGamepad interface for GTK3 keyboard
* Fix some implementation still being commented in the controller ui for keyboard
* Port screen handle code
* Remove all configuration management code and move HidNew to Hid
* Rename InputConfigNew to InputConfig
* Add a version field to the input config
* Prepare serialization and deserialization of new input config and migrate profile loading and saving
* Support input configuration saving to config and bump config version to 23.
* Clean up in ConfigurationState
* Reference SPB via a nuget package
* Move new input system to Ryujinx.Input project and SDL2 detail to Ryujinx.Input.SDL2
* move GTK3 input to the right directory
* Fix triggers on SDL2
* Update to SDL2 2.0.14 via our own fork
* Update buttons definition for SDL2 2.0.14 and report gamepad features
* Implement motion support again with SDL2
TODO: cemu hooks integration
* Switch to latest of nightly SDL2
* SDL2: Fix bugs in gamepad id matching allowing different gamepad to match on the same device index
* Ensure values are set in UI when the gamepad get hot plugged
* Avoid trying to add controllers in the Update method and don't open SDL2 gamepad instance before checking ids
This fixes permanent rumble of pro controller in some hotplug scenario
* Fix more UI bugs
* Move legcay motion code around before reintegration
* gamecontroller UI tweaks here and there
* Hide Motion on non motion configurations
* Update the TODO grave
Some TODO were fixed long time ago or are quite oudated...
* Integrate cemu hooks motion configuration
* Integrate cemu hooks configuration options to the UI again
* cemuhooks => cemuhooks
* Add cemu hook support again
* Fix regression on normal motion and fix some very nasty bugs around
* Fix for XCB multithreads issue on Linux
* Enable motion by default
* Block inputs in the main view when in the controller configuration window
* Some fixes for the controller ui again
* Add joycon support and fixes other hints
* Bug fixes and clean up
- Invert default mapping if not a Nintendo controller
- Keep alive the controller being selected on the controller window (allow to avoid big delay for controller needing time to init when doing button assignment)
- Clean up hints in use
- Remove debug logs around
- Fixes potential double free with SDL2Gamepad
* Move the button assigner and motion logic to the Ryujinx.Input project
* Reimplement raw keyboard hle input
Also move out the logic of the hotkeys
* Move all remaining Input manager stuffs to the Ryujinx.Input project
* Increment configuration version yet again because of master changes
* Ensure input config isn't null when not present
* Fixes for VS not being nice
* Fix broken gamepad caching logic causing crashes on ui
* Ensure the background context is destroyed
* Update dependencies
* Readd retrocompat with old format of the config to avoid parsing and crashes on those versions
Also updated the debug Config.json
* Document new input APIs
* Isolate SDL2Driver to the project and remove external export of it
* Add support for external gamepad db mappings on SDL2
* Last clean up before PR
* Addresses first part of comments
* Address gdkchan's comments
* Do not use JsonException
* Last comment fixes
* Restore removed text
* Adds more items to logs:
- Remove #1942
* Further removal of changes from #1942
* Removes hardcoded config state variables for logging
- Adds Configuration logging
* Decoupled logging from ReactiveObject
- Event handler added to Configuration state to handle logging of value changes
* Decoupled logging from ReactiveObject
- Event handler added to Configuration state to handle logging of value changes
* account: Adds Account Manager
In a way to have Custom User Profiles merged in master faster, this PR adds a `AccountManager` class (based on `AccountUtils` class) and the following changes have been made:
- Adds a "default profile values" which were the old hardcoded ones.
- The image profile is moved to the Account service folder.
- The hardcoded UserId for the savedata is now using the `AccountManager` last opened one.
- The DeviceId in Mii service is changed to the right value (checked by REd sys:set call).
* Fix csproj
* Addresses gdkchan's comments
* Fix UserProfile fields
* Fix mii GetDeviceId()
* Update Ryujinx.HLE.csproj
* misc: Add credit to AmiiboAPI properly and fix a warning disable
This PR adds a properly credit to AmiiboAPI which is used in our Amiibo emulation in the Readme and in the about window.
I've changed a wrong warning code added in a recent PR too.
* Update README.md
* Fix aligment
* Add initial implementation of the Tamper Machine
* Implement Atmosphere opcodes 0, 4 and 9
* Add missing TamperCompilationException class
* Implement Atmosphere conditional and loop opcodes 1, 2 and 3
* Inplement input conditional opcode 8
* Add register store opcode A
* Implement extended pause/resume opcodes FF0 and FF1
* Implement extended log opcode FFF
* Implement extended register conditional opcode C0
* Refactor TamperProgram to an interface
* Moved Atmosphere classes to a separate subdirectory
* Fix OpProcCtrl class not setting process
* Implement extended register save/restore opcodes C1, C2 and C3
* Refactor code emitters to separate classes
* Supress memory access errors from the Tamper Machine
* Add debug information to tamper register and memory writes
* Add block stack check to Atmosphere Cheat compiler
* Add handheld input support to Tamper Machine
* Fix code styling
* Fix build id and cheat case mismatch
* Fix invalid immediate size selection
* Print build ids of the title
* Prevent Tamper Machine from change code regions
* Remove Atmosphere namespace
* Remove empty cheats from the list
* Prevent code modification without disabling the tampering
* Fix missing addressing mode in LoadRegisterWithMemory
* Fix wrong addressing in RegisterConditional
* Add name to the tamper machine thread
* Fix code styling
Signal and setup events correctly
Eliminate possible races
Use a single event
Mark volatiles and reduce scope of waithandles
Common handler
100ms -> 50ms
* Minor wording fixes
* Exit dialogue.
* Update MainWindow.cs
* Update DlcWindow.cs
* I found an actual typo for once.
* There we go.
* Fix
* Update MainWindow.cs
* MainWindow is done
* Update ControllerWindow.cs
* Implement friendlier portable mode
* Remove first run dialog
* Disable updates in portable mode for now
* Convert relative custom paths to absolute ones
Also, fix a regression when custom path doesn't exist
This enforce speaker mode to avoid weird audio quality reduction with
output considered as headphones by Windows (It applies a HRTF or crossfeed filter supposed to improve audio quality, might be a bug on their end)
* Revise SystemInfo
Cleans up and adds a bit more info (logical core count and available mem at launch) to logs.
- Extract CPU name from CPUID when supported.
- Linux: Robust parsing of procfs files
- Windows: Prefer native calls to WMI
- Remove unnecessary virtual specifiers
* Address gdkchan's comments
* Address AcK's comments
* Address formatting nits
* ci: Use Github artifacts for PRs
This PR extends the build job by upload artifacts for all PRs.
The version of those builds is set to "1.0.0-<git_short_hash>" and those
builds have the updater explicitly disabled.
With this in place, we will be able to disable ApppVeyor on PRs.
* Add actions to comment build links
As Github doesn't provide links to unlogged users, we use nightly.link for that.
* Address Ac_k's comments
* Haydn: Part 1
Based on my reverse of audio 11.0.0.
As always, core implementation under LGPLv3 for the same reasons as for Amadeus.
This place the bases of a more flexible audio system while making audout & audin accurate.
This have the following improvements:
- Complete reimplementation of audout and audin.
- Audin currently only have a dummy backend.
- Dramatically reduce CPU usage by up to 50% in common cases (SoundIO and OpenAL).
- Audio Renderer now can output to 5.1 devices when supported.
- Audio Renderer init its backend on demand instead of keeping two up all the time.
- All backends implementation are now in their own project.
- Ryujinx.Audio.Renderer was renamed Ryujinx.Audio and was refactored because of this.
As a note, games having issues with OpenAL haven't improved and will not
because of OpenAL design (stopping when buffers finish playing causing
possible audio "pops" when buffers are very small).
* Update for latest hexkyz's edits on Switchbrew
* audren: Rollback channel configuration changes
* Address gdkchan's comments
* Fix typo in OpenAL backend driver
* Address last comments
* Fix a nit
* Address gdkchan's comments
* Fix updater breaking user run permissions on *nix
The updater currently sets the permissions to user run only when the yes button is clicked, this changes it to run on Updater.cs after it's done updating as it should.
* Fix nits
* Use multiple threads to download different chunks of an update simultaneously. This reduces time to complete the download significantly.
* Remove dirty-flag check (for test purposes)
* Clean up updater code.
* Include fallback to single-threaded updater if mt fails
* Reduce connection count to 4.
* Improve fallback on error.
Correct issue where data was missing during download due to total build size not being cleanly divisble by the connection count.
Cleaned up unnecessary code.
* Add missing return statements
* Fix alignment
* Alignment
* More alignment
* Rely on content-range request instead of xml/json size property.
* Re-instate dirty checking and version checking to move into review stage.
* Address comments
* Address comments
* Comments
* Comments
* Final...?
* final final
* final final final nit
* Use Array.Copy as requested by rip
* Updated some names for clarity.
* Move addition into for loop (to shorten line width)
* Add missing semicolon -- forgot to stage :9
* This should fix issue #1374 in Linux
Changes:
- Bind buttons by detecting the transition from down to up.
- Bind axis by detecting movement from value higher than 50% to a value lower than 50%.
Caveats:
- I have tested only with DS3 in Linux (Fedora 32).
- ZL and ZR detection works by accident. This code doesn't take negative axis into account.
The reason it works is because axis are managed in absolute value. So when pressing ZL/ZR
axis value goes from -1 to 1 (or 1 to 0 and back to 1) and this hits the axis detector.
- Likely I have broken all the other controllers xD (testing needed).
* Assign keyboardPressed
* Make a more robust detection of pressed buttons when using a controller
* Add interface to bind buttons from Joystick and Keyboard
* Fix style issues after code review by @AcK77 (Thanks!)
* Move new classes to Ryujinx.Ui.Input namespace
* Use explicit types instead of var
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Mary <thog@protonmail.com>
* Update Ryujinx/Ui/Input/JoystickButtonAssigner.cs
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Add a new empty line before
* Up
Co-authored-by: Jose Padilla <jose@prensalink.com>
Co-authored-by: Mary <thog@protonmail.com>
Co-authored-by: Ac_K <Acoustik666@gmail.com>
* Make Windows DPI aware to display properly on high-resolution screens.
* remove empty line
* Don't use app manifest, set process dpi aware programatically.
Store variables in Program.cs for use instead of re-creating them per class/ method.
* Fix for linux/osx
* Add braces
* Re-use manifest. It appears to be required on linux.
* Undo previous commit -- it appears linux was simply never affected.
* Addressed AcK's comments
* Remove unused usings
* Address comments by AcK #2
* Re-order
* Move FromHwnd call to ForceDpiAware class. Wrap in Try-Catch to prevent crashes on systems that don't support it.
* Additional code cleanup
* Remove "global::" reference.
* Implement "Hide Cursor On Idle" option
Adds a general option to autohide the cursor after 8s have elapsed.
* Fix cursor not hiding on Windows and dispose it
* Don't dispose cursor, fix var names
* Abide by the GNOME documentation
* Fix nits
* Disabled by default, make it so it doesn't utilize any timer
* Remove *NIX time and extra lines
* Don't calculate if option is disabled
* Move if case
* Fix alignment
* Update Joy-Con Images 2
This Updates the Joy-Con images, Changes include, adding a top view to the {Joy-Con Pair} image and {Joy-Con Left and Right} Images and adding a side view to {Joy-Con Left and Right} images, the colours
should be less washed out as well and I also decided to clean up the raw image because even though you could not see it in the GUI, the Images themselves looked very messy when opened in a Vector tool
* Fix Sily Right Joy Con mistake
* Make ZL and ZR more visable
- Bind toggle events after setting up their current values. This fixes the issue where the config is saved 10 times when the main window is opened 😬
- Write to disk immediately to decrease the chances of corruption
* Initial Setup: Reload keys before verifying firmware
Also, display the NoKeys dialog if keyset is empty when verifying
firmware.
* LoadApplications: Remove the lone debug log and print the error directly
Currently, when configuring controller input with an "Xinput Controller" or "Unmapped Controller", the window does not fit the images for Pro Controller (width limited) or Joycon Pair (width and height limited). This PR proportionally enlarges the window so that no scrolling is ever necessary to fully see the controller image.
This updates the old Images used for the input section for Ryujinx. The old one didn't play nice with the some GTK themes like light mode, this new one does.
Fixes the crashes on linux when you stop emulation, and when you try to
exit the emulator while a game is running.
Also tested on windows without problems on my side.
* gui: Refactoring Part 1
* Fix ProfileDialog.glade path
* Fix Application.Quit assert
* Fix TitleUpdateWindow parent
* Fix TitleUpdate selected item
* Remove extra line in TitleUpdateWindow
* Fix empty assign of Enum.TryParse
* Add Patrons list in the About Window
* update about error messages
* Enable Profiled Persistent Translation Cache (PPTC) by default
Enables PPTC by default. Enough time has passed and enough games tested that it should be the preferred setting for 99.9% of games. In case we are worried about PPTC files being put on the user's disk, shader cache already does this by default and generates about the same size files on average, so this should no longer be a concern.
* Update config.json with PTC set to true
* Updated _schema.json to set PPTC to true.
* Distribute with OpenAL Soft on Windows
This remove dependency on OpenAL EA on Windows and allows to operate with both backend without any user interventions.
Co-authored-by: jduncanator <jduncanator@hotmail.com>
* Fix Atmosphere utf8 issue
Co-authored-by: jduncanator <jduncanator@hotmail.com>
A small code change to fix the issue that was forcing the user to press the "Yes" button twice to restart Ryujinx after it had been updated, instead of only once.
* Interrupt GPU command processing when a frame's fence is reached.
* Accumulate times rather than %s
* Accurate timer for vsync
Spin wait for the last .667ms of a frame. Avoids issues caused by signalling 16ms vsync. (periodic stutters in smo)
* Use event wait for better timing.
* Fix lazy wait
Windows doesn't seem to want to do 1ms consistently, so force a spin if we're less than 2ms.
* A bit more efficiency on frame waits.
Should now wait the remainder 0.6667 instead of 1.6667 sometimes (odd waits above 1ms are reliable, unlike 1ms waits)
* Better swap interval 0 solution
737 fps without breaking a sweat. Downside: Vsync can no longer be disabled on games that use the event heavily (link's awakening - which is ok since it breaks anyways)
* Fix comment.
* Address Comments.
* am/gui: Implement Wake-up message.
This implement the ability to send a Wake-up (Resume) message to the guest.
Sometime games needs to Sleep and Wake-up the switch to unlock some ingame features.
* Address gdkchan feedback
* Thread create/delete stutter workarounds Pt 1
* As tiered compilation is disabled, disable quick jit too
Should result in tier 1 compilation all the time
* Fix rebase.
* Rewrite scheduler context switch code
* Fix race in UnmapIpcRestorePermission
* Fix thread exit issue that could leave the scheduler in a invalid state
* Change context switch method to not wait on guest thread, remove spin wait, use SignalAndWait to pass control
* Remove multi-core setting (it is always on now)
* Re-enable assert
* Remove multicore from default config and schema
* Fix race in KTimeManager
* IPC refactor part 2: Use ReplyAndReceive on HLE services and remove special handling from kernel
* Fix for applet transfer memory + some nits
* Keep handles if possible to avoid server handle table exhaustion
* Fix IPC ZeroFill bug
* am: Correctly implement CreateManagedDisplayLayer and implement CreateManagedDisplaySeparableLayer
CreateManagedDisplaySeparableLayer is requires since 10.x+ when appletResourceUserId != 0
* Make it exit properly
* Make ServiceNotImplementedException show the full message again
* Allow yielding execution to avoid starving other threads
* Only wait if active
* Merge IVirtualMemoryManager and IAddressSpaceManager
* Fix Ro loading data from the wrong process
Co-authored-by: Thog <me@thog.eu>
This is an issue happening when you change your datetime format on your
system and try to sort via last played datetime. DateTime.Parse use the
current thread culture and will not parse date correctly, effectively
causing a crash.
As such, I added a check when loading the game list that ensure that the
datetime is valid in current culture.
Fix#1727.
* gui: Toggle between docked/handheld mode by clicking status bar
This PR just add a way to toggle between the docked and the handheld mode by clicking the lable in the status bar.
Nothing more.
* Fix glade file formatting
* Add VSync toggle
* shader cache: Fix Linux boot issues
This rollback the init logic back to previous state, and replicate the
way PTC handle initialization.
* shader cache: set default state of ready for translation event to false
* Fix cpu unit tests
* Standardize to camel-case: option to check for updates on launch
Updates the "Check for updates on launch" to read instead "Check For Updates On Launch" to be consistent with camel-case options elsewhere in the UI. This time done with manual editing instead of with the Glade app.
* Updated to match general English rules on articles and conjunctions
* infra: Migrate to .NET 5
This migrate projects and CI to .NET 5
* Remove language version restrictions (now on 9.0 by default)
* infra: pin .NET 5 to avoid later issues
* infra: Cleanup csproj files
* infra: update dependencies
* infra: Add temporary workaround for a bug in Vector128.Create
see https://github.com/dotnet/runtime/issues/44704 for more informations
* SettingsWindow: Add an Apply button
Adds an apply button that doesnt close the settings window when saving
the changes.
* fix the apply button staying turned on after clicking it
Here come Salieri, my implementation of a disk shader cache!
"I'm sure you know why I named it that."
"It doesn't really mean anything."
This implementation collects shaders at runtime and cache them to be later compiled when starting a game.
Command line arguements are not preserved by the updater, and this causes an issue when the updater restarts Ryujinx in portable mode as it will create/use/modify its default directory instead.
This simple pull addresses the first part of #1594
As far as the second part of the issue, where the updater perhaps overzealously deletes everything but log files and folders, which causes problems in portable installs with a user subfolder or something else inside the Ryujinx folder.
Perhaps an UpdateList.txt containing a list of files that the updater deletes is included in the ryujinx.zip/tar.gz/etc and placed in the upacked directory for the updater to use upon the next upgrade.
The build system can run something like `forfiles /s /m *.txt /c "cmd /c echo @relpath"` or the correct command for the OS and include it in the distribution, or it could be generated by the updater itself.
* fix stalling when server is offline
* add retry timer to fail server connections, fix alt slot number
* fix alt slot key issue
* fix crash when saving controller config with empty fields
* code fixes
* add index check in motion hid update, made HandleResponse async
Co-authored-by: Emmanuel <nhv3@localhost.localdomain>
* WIP Range Tracking
- Texture invalidation seems to have large problems
- Buffer/Pool invalidation may have problems
- Mirror memory tracking puts an additional `add` in compiled code, we likely just want to make HLE access slower if this is the final solution.
- Native project is in the messiest possible location.
- [HACK] JIT memory access always uses native "fast" path
- [HACK] Trying some things with texture invalidation and views.
It works :)
Still a few hacks, messy things, slow things
More work in progress stuff (also move to memory project)
Quite a bit faster now.
- Unmapping GPU VA and CPU VA will now correctly update write tracking regions, and invalidate textures for the former.
- The Virtual range list is now non-overlapping like the physical one.
- Fixed some bugs where regions could leak.
- Introduced a weird bug that I still need to track down (consistent invalid buffer in MK8 ribbon road)
Move some stuff.
I think we'll eventually just put the dll and so for this in a nuget package.
Fix rebase.
[WIP] MultiRegionHandle variable size ranges
- Avoid reprotecting regions that change often (needs some tweaking)
- There's still a bug in buffers, somehow.
- Might want different api for minimum granularity
Fix rebase issue
Commit everything needed for software only tracking.
Remove native components.
Remove more native stuff.
Cleanup
Use a separate window for the background context, update opentk. (fixes linux)
Some experimental changes
Should get things working up to scratch - still need to try some things with flush/modification and res scale.
Include address with the region action.
Initial work to make range tracking work
Still a ton of bugs
Fix some issues with the new stuff.
* Fix texture flush instability
There's still some weird behaviour, but it's much improved without this. (textures with cpu modified data were flushing over it)
* Find the destination texture for Buffer->Texture full copy
Greatly improves performance for nvdec videos (with range tracking)
* Further improve texture tracking
* Disable Memory Tracking for view parents
This is a temporary approach to better match behaviour on master (where invalidations would be soaked up by views, rather than trigger twice)
The assumption is that when views are created to a texture, they will cover all of its data anyways. Of course, this can easily be improved in future.
* Introduce some tracking tests.
WIP
* Complete base tests.
* Add more tests for multiregion, fix existing test.
* Cleanup Part 1
* Remove unnecessary code from memory tracking
* Fix some inconsistencies with 3D texture rule.
* Add dispose tests.
* Use a background thread for the background context.
Rather than setting and unsetting a context as current, doing the work on a dedicated thread with signals seems to be a bit faster.
Also nerf the multithreading test a bit.
* Copy to texture with matching alignment
This extends the copy to work for some videos with unusual size, such as tutorial videos in SMO. It will only occur if the destination texture already exists at XCount size.
* Track reads for buffer copies. Synchronize new buffers before copying overlaps.
* Remove old texture flushing mechanisms.
Range tracking all the way, baby.
* Wake the background thread when disposing.
Avoids a deadlock when games are closed.
* Address Feedback 1
* Separate TextureCopy instance for background thread
Also `BackgroundContextWorker.InBackground` for a more sensible idenfifier for if we're in a background thread.
* Add missing XML docs.
* Address Feedback
* Maybe I should start drinking coffee.
* Some more feedback.
* Remove flush warning, Refocus window after making background context
* Replace Host FPS with FIFO%
* Change measurement order. Improve calculation.
Now at 100% when FIFO is blocking game exectution, rather than "0".
* Address feedback (1)
* Remove Host FPS
* FIFO rather than Fifo
* Address Ac_k feedback
* Rebase
* hos/gui: Add a check of NCA program index in titleid
This add a check to `ApplicationLoader` for the last 2 digits of the game TitleId who seems to be the NCA program index.
We currently return the last index, instead of the lower one.
Same check is added to ApplicationLibrary in the UI.
I've cleaned up both file too.
* hle: implement partial relaunch logic
TODO: make the emulator auto relauch.
* Handle auto relaunch
* hle: Unify update usage system
* hle: Implement support of multi programs in update system
* Add some documentation
* Address rip's comment
Co-authored-by: Ac_K <Acoustik666@gmail.com>
This update the "No keys" dialog and block starting NSP/XCI/NCA without firmware.
Also propose to the user if they want to install firmware if they start an untrimmed XCI and remove KEYS.md as it was completely outdated.
PS: Also fix a bug with "&" in URL with OpenUrl on Windows.
This project wasn't really used by anyone and isn't worth mantaining.
This commit remove the profiler entirely from Ryujinx and remove the associated CI tasks.
* Allow launching with custom data directories
Don't load alternate keys when using custom directory
* Address gdkchan's comments
* Misc fixes to log levels
Added more enabled log levels by default
Moved successful config updation to Notice as
1. It's not a warning
2. Warnings could've been disabled by the config load and hence message
would be lost
* Initial commit
Enable proper LED patterns
Toggle Hotkeys only on focus
Ignore Handheld on Docked mode
Remove PrimaryController
Validate NpadIdType
Rewrite NpadDevices to process config in update loop
Cleanup
* Notify in log periodically when no matched controllers
* Remove duplicate StructArrayHelpers in favor of Common.Memory
Fix struct padding CS0169 warns in Touchscreen
* Remove GTK markup from Controller Applet
Use IList instead of List
Explicit list capacity in 1ms loop
Fix formatting
* Restrict ControllerWindow to show valid controller types
Add selected player name to ControllerWindow title
* ControllerWindow: Fix controller type initial value
NpadDevices: Simplify default battery charge
* Address AcK's comments
Use explicit types and fix formatting
* Remove HashSet for SupportedPlayers
Fixes potential exceptions due to race
* Fix ControllerSupportArg struct packing
Also comes with two revisions of struct for 4/8 players max.
